Electrical Estimating Services | Electrical Estimators

How to Quote an Electrical Job: Steps and Sample Quote Layout

Plenty of contractors have sent a quote that won the job and then lost money. The scope was vague, the access was harder than expected, and the customer assumed things were included that you never meant to cover. Knowing how to quote an electrical job in a clear, repeatable way fixes most of that. This guide walks through one worked example, a small office power and lighting add-on, from first phone call to follow-up.

Electrical estimating workspace with blueprints, laptop, calculator and quotation documents.

How to quote an electrical job: the seven steps

The example job is simple. A small office tenant wants four extra double power outlets, six LED panel lights in a new meeting room, and two light switches. All numbers in this guide are placeholders, so swap in your own.

Step 1: Understand the job before you price it

Start with what the customer wants, not what you think they need. Ask what the space is used for, what is being added or changed, and when they need it done. Ask who the decision-maker is and whether anyone else, such as a landlord or builder, has to approve the work.


For our office example, the useful questions are: Is the room already built, or still being fitted out? Is the office occupied during the day? Does the tenant already have the lights and outlets chosen, or do you need to supply them? Ten minutes on the phone here saves a wasted site visit later.

Step 2: Gather the site details

Where you can, visit the site. Photos from the customer help, but they rarely show what is above the ceiling or inside the switchboard. Look at the existing board and note what you can see, check the ceiling type, and work out how you will get cable from the board to the new work. Check parking, access hours and anything that will slow you down.


Write notes as you go, not afterwards. Good site notes become the backbone of your scope, and they protect you if the customer later says the job was different from what they described. If you are a smaller operator wondering how much structure is worth the effort, our article on whether electrical estimating can help small contractors covers where a consistent process pays off.

Step 3: Write the scope, and what is excluded

The scope is a plain description of what you will do. The exclusions are just as important. In the example, the scope might read: supply and install four double power outlets, six LED panel lights and two switches, extend existing circuits as required, and test and label the work.


Then list what you are not doing. For this job, that could be patching or painting after cable runs, moving furniture, work on any other part of the building, and any repairs to existing wiring found to be faulty. Customers read the scope to see what they get and the exclusions to see what they might have to pay for separately. Being upfront at this stage prevents the awkward conversation halfway through the job.

Step 4: Price labour and materials in simple terms

For small jobs, keep the pricing method simple enough to repeat every time. Break the work into items, such as outlets, lights, switches and cabling, and think about two things for each: the materials you will supply and the time it takes to install them.


Use your own labour rate and your own supplier pricing. Don’t copy someone else’s, because your costs, overheads and area are different. Add the less visible items that quotes often miss: travel, site setup, testing, labelling, paperwork, and the time spent on the original site visit and the quote itself.


Pricing a small job this way is quoting, not full estimating. When a job needs detailed takeoffs, productivity allowances and risk analysis, the process in our step-by-step guide to preparing an electrical estimate is the better tool.

Step 5: Check your allowances and margin

Before the numbers go into a document, ask what could go wrong. Is the ceiling harder to access than you assumed? Could the existing board be full? Will you need to come back after hours?
You can cover those risks in two ways. Either you include an allowance in the price, or you state an assumption in the quote and explain how a change would be handled. Either is fine, as long as you do one of them on purpose. Then check that your margin is what you actually intended, and that the total still looks right compared with similar jobs you have done. This is how to price an electrical job so it still makes sense after the surprises.

Step 6: Lay out the quote clearly

A good electrical quote layout is easy to read at a glance. The customer should see what they are getting, what it costs and what is not included, without having to ask. A simple table with a description, quantity, unit and line total does the job for most small works.

Example only: electrical job quote example (office power and lighting add-on)

Description

Quantity

Unit

Line total

Supply and install double power outlets

4

each

$400

Supply and install LED panel lights

6

each

$600

Supply and install light switches

2

each

$200

Cabling and circuit extension

1

lot

$300

Testing, labelling and paperwork

1

lot

$100

Travel and site setup

1

lot

$100

Total

  

$1,700

Note: prices and allowances vary by project, location and supplier. Always confirm current figures for your job.


Above the table, put your business details, the customer’s name, the site address, the date and a quote reference. Below it, add the scope summary, exclusions, assumptions, how long the quote is valid and how the customer accepts it. For how tax shows on your quotes, confirm requirements for your business with the relevant authority or your accountant. If you want a reusable electrical quote template, build one with these headings and fill in the details each time.

Step 7: Send it and follow up

Send the quote promptly, while the job is still fresh in the customer’s mind. A short covering message that summarises the job and invites questions is better than an attachment with no explanation. Say when you will check in.


Then follow up. A quick call or message a few days later often decides the job, because many customers simply forget or don’t know whether to ask questions. If they say no, ask politely whether price, timing or scope was the issue. That feedback improves your next quote more than any template will.

Quote wording that avoids arguments

Many disputes over small jobs come from unclear wording, not bad intent. Write the quote as if a stranger had to understand it without you in the room.


Use plain descriptions rather than shorthand. “Supply and install four double power outlets in the meeting room, wired from the existing circuit where suitable” is better than “four GPOs as discussed”. State your assumptions, such as existing cabling being suitable for reuse, and say what happens if that turns out to be wrong. Say how variations are handled, for example that extra work will be quoted and agreed before it starts.


Be careful with the words “quote” and “estimate”. The terms are used differently, so make clear in writing what your document means. State your payment terms as you have set them, and for anything regulated, such as licensing, tax, deposits, warranties or consumer obligations, confirm requirements for your business with the relevant authority or your accountant. The Australian Government’s business.gov.au is a general starting point for small business information, though it does not replace advice for your situation.


Finally, keep the tone professional but human. A quote that sounds clear and fair builds trust before you’ve started work.

When a job is too big for a quick quote

The method above suits small, well-defined jobs. It starts to break down when the scope is unclear, the drawings are complex, or the job runs over multiple stages. If you find yourself guessing at quantities, cannot finish a scope without a long list of assumptions, or are working from a full set of plans, you need a proper takeoff rather than a quick quote.


Warning signs include several trades depending on your work, switchboard or distribution upgrades, large repeated quantities such as dozens of lights and outlets, or a builder expecting a detailed breakdown. At that point, a rushed price becomes a gamble. Some contractors bring in electrical estimating support for those jobs so they keep winning larger work without taking on pricing risk they cannot see.


Commercial tender pricing is a different discipline again, with its own risks, and it deserves a full process rather than an extended version of a small-job quote.

Frequently asked questions

How do I price an electrical job if I'm not sure how long it will take?

Break the job into items, such as outlets, lights, switches and cabling, and think through the materials and time for each. Where you can’t be sure, either include an allowance or state your assumption in the quote and explain how a change would be handled. Checking the total against similar past jobs is a useful sense check.

What should an electrical quote template include?

At minimum: your business details, the customer and site details, a date and reference, a clear scope, an itemised table, exclusions, assumptions and how the customer accepts. A consistent electrical quote template means every quote looks professional and nothing gets left out under time pressure.

Conclusion

Good electrical quoting comes down to a repeatable habit: understand the job, record what you see on site, write a clear scope with exclusions, price it in simple terms, and lay it out so the customer knows exactly what they’re getting. Add plain wording and a prompt follow-up, and you’ll know how to quote an electrical job without leaving yourself out of pocket. Build the process into a template, refine it after every job, and recognise when a larger job needs a proper takeoff.


A job too big to quote by hand? Talk to the team and we can help you decide whether it needs a proper takeoff.

Scroll to Top

Request Fee